| English | Japanese |
|
|
Access until yesterday |
| Introduction. | [Lily Diary] Diary of Life in Mindanao |
| 25/06/08 | AutoCWType_Ver1.4.1 |
| 25/06/07 | Introducing the Shack |
| 25/06/06 | A portrait illustrated by ChatGPT |
| 25/05/26 | Windows full-width half-width switching |
| 25/05/17 | OK2ZAW BCD to 16 converter |
| 25/05/16 | For 3.5MHz zepp antennas Stepping motor this and that |
| 25/05/15 | 3.5MHz stepping motor plan |
| 25/05/14 | 3.5MHz tuning coil installed |
| 25/05/11 | 3.5MHz antenna installation completed |
| 25/05/03 | JTDX automatic operation program Ver0.4.3 |
| 25/04/26 | Drone Habsan ZINO |
| 25/04/25 | Time setting Ver0.3 |
| 25/04/24 | AutoCWType_Ver1.3 |
| 25/04/23 | FTDX3000 LCD repair preparation |
| 25/04/22 | Installation plan for 3.5 MHz Twep antenna |
| 25/04/21 | AutoCWType_Ver1.1 |
| 25/04/20 | 10,14MHz antenna installation completed |
| 25/04/19 | JTDX automatic operation program Ver0.4.1 |
| 25/04/19 | Antenna pole installation at 14 MHz |
| 25/04/18 | ThinkPad X390 repair completed |
| 25/04/17 | Search is now available. |
| 25/04/15 | Preparation of 10 MHz dipole |
| 25/04/12 | Hexbeam Part8 |
| 25/04/06 | ThinkPad X390 is broken. |
| 25/04/05 | Time Setting Program |
| 25/03/31 | JTDX Automatic Operation Program |
| 25/03/30 | Automatic log sending from CWType to Hamlog |
| 25/03/21 | Hexbeam Part7 |
| 25/03/20 | FreeDV Part3 First QSO |
| 25/03/18 | FreeDV Part2 QSO in shack |
| 25/03/16 | Hexbeam Part6 |
| 25/03/15 | FreeDV Part1 installation |
| 25/03/09 | Hexbeam Part5 |
| 25/03/07 | Hexbeam Part4 |
| 25/03/05 | 28MHz antenna modification |
| 25/03/01 | FTDX3000 is broken! |
| 25/02/28 | Pile up at 50MHz FT8 |
| 25/02/28 | DXV500ZS linear amplifier repair |
| 25/02/27 | Pipe and rebuild plan for tower |
| 25/02/26 | Direction of Japan from Ozamiz |
| 25/02/26 | 28MHz does not fly. |
| 25/02/23 | DXV500ZS linear amplifier repair |
| 25/02/22 | Hexbeam Part3 |
| 25/02/21 | Hexbeam Part2 |
| 25/02/18 | 28MHz antenna construction |
| 25/02/17 | 18,24MHz antenna height construction |
| 25/02/16 | Z26NS Cosovo |
| 25/02/14 | 21MHz FT8 |
| 25/02/12 | Antenna repair at 7,21 MHz |
| 25/02/08 | CW operation at 21MHz |
| 25/02/05 | DXV500ZS linear amplifier failure |
| 25/01/19 | Input Director |
| 25/01/14 | Temporary License Renewal |
| Antenna pole installation at 14 MHz (2025/04/19) | ||
|---|---|---|
| 7MHz,18-24MHz as well as antennasI had a 6m pole installed on the garage side of the 14MHz The pole is 6m long and the mounting point is 2m high, making it 8m high  |
||
| The pole is equipped with a pulley at the end so that the dipole can be easily raised and lowered. One person can adjust the antenna.  |
||
Drilling holes in concrete columns. |
||
Pipe supports are hammered here. |
||
| Drill a hole in the tin roof and insert the pipe. It is a heavy pipe, so it takes two people to work on it.  |
||
Temporarily fix the pipe with rope |
||
| welding operations The work was done by workers at a nearby tricycle factory.  |
||
| 500 pesos for work in hot weather. Pipe 1 1/4" 6m is 1000 pesos (2700 yen) Installation welding labor cost 500 pesos (1,350 yen) The labor cost is unusually cheap. |
||
| April 17, 2024 April 19, 2025 |