| English | Japanese |
|
|
Access until yesterday |
| Introduction. | [Lily Diary] Diary of Life in Mindanao |
| 25/06/07 | Introducing the Shack |
| 25/06/06 | A portrait illustrated by ChatGPT |
| 25/05/26 | Windows full-width half-width switching |
| 25/05/17 | OK2ZAW BCD to 16 converter |
| 25/05/16 | For 3.5MHz zepp antennas Stepping motor this and that |
| 25/05/15 | 3.5MHz stepping motor plan |
| 25/05/14 | 3.5MHz tuning coil installed |
| 25/05/11 | 3.5MHz antenna installation completed |
| 25/05/03 | JTDX automatic operation program Ver0.4.3 |
| 25/04/26 | Drone Habsan ZINO |
| 25/04/25 | Time setting Ver0.3 |
| 25/04/24 | AutoCWType_Ver1.3 |
| 25/04/23 | FTDX3000 LCD repair preparation |
| 25/04/22 | Installation plan for 3.5 MHz Twep antenna |
| 25/04/21 | AutoCWType_Ver1.1 |
| 25/04/20 | 10,14MHz antenna installation completed |
| 25/04/19 | JTDX automatic operation program Ver0.4.1 |
| 25/04/19 | Antenna pole installation at 14 MHz |
| 25/04/18 | ThinkPad X390 repair completed |
| 25/04/17 | Search is now available. |
| 25/04/15 | Preparation of 10 MHz dipole |
| 25/04/12 | Hexbeam Part8 |
| 25/04/06 | ThinkPad X390 is broken. |
| 25/04/05 | Time Setting Program |
| 25/03/31 | JTDX Automatic Operation Program |
| 25/03/30 | Automatic log sending from CWType to Hamlog |
| 25/03/21 | Hexbeam Part7 |
| 25/03/20 | FreeDV Part3 First QSO |
| 25/03/18 | FreeDV Part2 QSO in shack |
| 25/03/16 | Hexbeam Part6 |
| 25/03/15 | FreeDV Part1 installation |
| 25/03/09 | Hexbeam Part5 |
| 25/03/07 | Hexbeam Part4 |
| 25/03/05 | 28MHz antenna modification |
| 25/03/01 | FTDX3000 is broken! |
| 25/02/28 | Pile up at 50MHz FT8 |
| 25/02/28 | DXV500ZS linear amplifier repair |
| 25/02/27 | Pipe and rebuild plan for tower |
| 25/02/26 | Direction of Japan from Ozamiz |
| 25/02/26 | 28MHz does not fly. |
| 25/02/23 | DXV500ZS linear amplifier repair |
| 25/02/22 | Hexbeam Part3 |
| 25/02/21 | Hexbeam Part2 |
| 25/02/18 | 28MHz antenna construction |
| 25/02/17 | 18,24MHz antenna height construction |
| 25/02/16 | Z26NS Cosovo |
| 25/02/14 | 21MHz FT8 |
| 25/02/12 | Antenna repair at 7,21 MHz |
| 25/02/08 | CW operation at 21MHz |
| 25/02/05 | DXV500ZS linear amplifier failure |
| 25/01/19 | Input Director |
| 25/01/14 | Temporary License Renewal |
| Hexbeam Part4 (2025/03/07) | ||
|---|---|---|
| Until now.Hexbeammouth turned down at the cornerslink 24/10/14 Hexbeam Purchase Plan 25/02/21 Hexbeam Part2 25/02/22 Hexbeam Part3 25/03/07 Hexbeam Part4 25/03/09 Hexbeam Part5 25/06/16 Hexbeam Part6 25/03/21 Hexbeam Part7 25/04/12 Hexbeam Part8 |
||
| The fiber pipe ordered by HexBeam pert2 (2025/02/21) has arrived! Sample from Alibaba's HENAN TOP INDUSTRY TECHNOLOGY CO.,LTD. Glass fiber pipe for spreader arm has arrived! Φ25mm*1.22m Φ19mm*1.22m Φ12.7mm*1.22m The 19mm and 12.7mm were painted, but the 25mm was still on fiberglass. The fiber pipe I ordered from HexBeam pert2 (2025/02/21) has arrived A sample of fiberglass pipe to be used for the spreader arm arrived from Alibaba's HENAN TOP INDUSTRY TECHNOLOGY CO.,LTD Φ25mm*1.22m Φ19mm*1.22m Φ12.7mm*1.22m The 19mm and 12.7mm were painted, but the 25mm was left as is with the fiberglass material  |
||
| Estimated at sample price for one set only to verify actual use. 67 including shipping 10,000 yen To verify whether it can actually be used, we will estimate the sample To verify whether it can actually be used, we will estimate the sample price for one set only. 67 dollars (10,000 yen) including shipping  |
||
| I think it is a little stiff. I feel like the flexibility is a little stiff.  |
||
| It is somewhat flexible, but not too much. Is this what it looks like? It's bending quite a bit. Is that normal?  |
||
| Max-Gain Systems, Inc.and ... andNA4RR Hexbeam SalesWhen you look at the pictures of the The thickest pipe also seems to be quite wrinkled, but is this the case? Looking at the photos fromMax-Gain Systems, Inc.. ANDNA4RR Hexbeam Sales, it looks like even the thickest pipe is quite bent, but is this normal?  |
||
| KIO TechnologyInstall the clamp as a spreader arm based on the information in Based on the information fromKIO Technology, we will attach the clamp as a spreader arm.  |
||
| Marking while converting inches to centimeters in ChatGPT Use ChatGPT to convert inches to centimeters and mark them.  |
||
| Clip attached to spreader arm Clip attached to spreader arm  |
||
| Trouble #1. The end end of the 19mm pipe you sent me was cracked. Repaired with hose band. First problem The end of the 19mm pipe I received was cracked. I fixed it with a hose clamp.  |
||
| Trouble number two. One caulk on the rope end purchased from NA4RR Hexbeam Sales was loose! I sent them an email to see if they would replace it. Second problem One of the rivets on the end of the rope I bought from NA4RR Hexbeam Sales was loose. I sent them an email to see if they would replace it.  |
||
| We need to buy 5 more bottles. 147 U.S. dollars 22,000 yen I'm going to run out of money and won't be able to afford it until my pension 4 months down the road. Sorry Hank Wang. I need to buy 5 more bottles. $147 22,000 yen I'm so broke I don't think I'll be able to buy them until my pension is due in 4 months.  |
||
| March 05, 2024 March 09, 2025 |