| English | Japanese |
|
|
Yesterdays access |
| Page Top | [Lily Diary.】 A diary of life in Mindanao. |
| 26/06/16 | Installing an AS5600 magnetic encoder on a KR-500. |
| 26/06/05 | Grandson Zion's CQ |
| 26/06/04 | Replacing the potentiometer on the KR-500 elevation rotator |
| 26/06/03 | Making a Repeater Controller Pert4 |
| 26/06/01 | Weather Monitor software |
| 26/05/31 | Weather Monitor |
| 26/05/21 | JTDX Auto Run BUGFIX |
| 26/05/17 | Repair of satellite antenna system |
| 26/05/13 | Repair of Alinco DR130 |
| 26/05/07 | Making a Repeater Controller Pert3 |
| 26/05/03 | Indonesian satellite friend YC8RPK |
| 26/04/26 | DXCC200 achieved |
| 26/04/23 | Communication via ISS voice repeater |
| 26/04/20 | WSJT-X Auto Run Ver0.1.5 |
| 26/04/19 | Got an Alinco DR-130 |
| 26/04/15 | Clublog Charts |
| 26/04/10 | Regarding POC transceivers |
| 26/04/08 | Using KENWOOD AT-300 with YAESU radio |
| 26/03/17 | How to establish a radio club in the Philippines |
| 26/03/10 | KENWOOD AT-300 with YAESU radio |
| 26/02/27 | Philippine NTC Amateur Radio License Examination Question Bank |
| 26/02/20 | Package received from JK1SNS |
| 26/02/18 | Temporary License Renewal |
| 26/02/14 | Satellite Tracking Software SatTrack |
| 26/02/05 | Making a Repeater Controller Pert2 |
| 26/02/02 | CQ on satellite IO-86 |
| 26/01/27 | Shack & Repeater Controller |
| 26/01/16 | Making a Repeater Controller |
| 26/01/16 | Making aRotator Interface PCB |
| 26/01/10 | Satellite antenna installation |
| 26/01/08 | WSJT-X Remote Operation |
| 26/01/07 | JTDX Remote Operation |
| 26/01/04 | log_reciver_Ver2.6.6 |
| 26/01/04 | Tailscale VPN software for JTDX_Remote |
| Online Multiple Choice Reviewers to the Phil Amateur Radio Examination by 4F3EW A joint project by JI1FGX/DU9 and DV9JRD |
| Repeater Controller Construction Part 4 (2026/06/03) | ||
|---|---|---|
| The repeater controller circuit board I ordered from JLCPCB has been completed. I assembled it last night and started testing it. Regarding the repeater controller part 3...Please see here..  |
||
| This is the box I bought from Shopee. I tried installing the LCD screen, but it doesn't look very good.  |
||
This is the repeater analog circuit board that I first ordered from JLCPCB on February 2nd. |
||
| However, the item was delivered without a pattern. It was a regrettable ordering mistake.  |
||
| This is my second order to JLCPCB. The left side is the repeater analog mixer board. The right side is the CPU ATMEGA2560 board. The ATMEGA256 is so large that it required two circuit boards.  |
||
| This is my third order for circuit boards from JLCPCB. I changed the CPU from ATMEGA2560 to ESP32-S3 and mounted the analog mixer and ESP32-S3 on a single circuit board. It all fit on a 130mm x 100mm circuit board.  |
||
This is a double-sided circuit board. |
||
| However, the ESP32-S3 was 2.54mm narrower. The mistake was that I found and downloaded the KiCAD footprint for the ESP32-S3 from the internet and used it as is.  |
||
| For now, I'm testing by using jumper wires to run seven wires on one side in aerial wiring. The ESP32-S3 is working smoothly, and both the CWID and Voice ID are normal. We will conduct a few more tests.  |
||
| June 1, 2026. June 4, 2026. |