The Shack (2024/10/09) Shack Setup (October 09, 2024)
Shack Photos From left. Samway DXV500ZS, FTDX3000, MD-200 ThinkPad X390 for digital mode The rightmost one is ThinkPad X1 carbon for daily use for video editing and editing this page. Behind is Xiaomi monitor A27i 27" display
Photo of the shack: From left to right:.
Samway DXV500ZS
FTDX3000 MD-200
ThinkPad X390 for digital modes
ThinkPad X1 Carbon, used for video editing and regular tasks like editing this page
In the back, there is a Xiaomi Monitor A27i 27-inch display.
Three dipoles are switched using AMERITRON RCS-10 The Samway DXV500ZS is a 600W at 7MHz, 400W at 14MHz, 350W at 18MHz, 200W at 21MHz Not available at 24, 28MHz and 50MHz
I am using the AMERITRON RCS-10 to switch between three dipoles. The Samway DXV500ZS can handle:.
600W on 7MHz
400W on 14MHz
350W on 18MHz
200W on 21MHz
It cannot be used on 24MHz, 28MHz, and 50MHz.
WSJT-X, JTDX, RTTY, CW (CW TYPE) can be used with ThinkPadX390 on the left On the left, the ThinkPad X390 is used for WSJT-X, JTDX, RTTY, and CW (CW TYPE).
Logging is done using JT_Linker and HAMLOG FT8,FT4 logs are recorded in real time in LoTW, Clublog and eQSL Also Cluster SoftwareDX Monitorto check on the DX by moving the
I use JT_Linker and Turbo HAMLOG for logging. FT8 and FT4 logs are recorded in real-time on LoTW, Clublog, and eQSL. Additionally, I run theDX Monitorcluster software to keep track of DX activity.
The 27-inch monitor has JTDX or WSJT-X, JTAlert and GridTrackey are displayed Display resolution of 1920x1080 is a bit small.
On a 27-inch monitor, I display JTDX or WSJT-X, JTAlert, and GridTracker. With a display resolution of 1920x1080, the screen feels a bit cramped.