| English | Japanese |
|
|
Yesterdays access |
| Page Top | [Lily Diary.】 A diary of life in Mindanao. |
| 26/08/05 | IC-820H Receiver Sensitivity Test |
| 26/08/02 | Satellite SatBox Development in Progress - Part 2 |
| 26/07/16 | Delivery of the 3D printed panels |
| 26/07/09 | Development of SatBox for satellites |
| 26/07/05 | Weather Monitor Indoor Unit |
| 26/06/30 | Creating data for 3D printers using FreeCAD |
| 26/06/16 | Installing an AS5600 magnetic encoder on a KR-500. |
| 26/06/05 | Grandson Zion's CQ |
| 26/06/04 | Replacing the potentiometer on the KR-500 elevation rotator |
| 26/06/03 | Making a Repeater Controller Pert4 |
| 26/06/01 | Weather Monitor software |
| 26/05/31 | Weather Monitor |
| 26/05/21 | JTDX Auto Run BUGFIX |
| 26/05/17 | Repair of satellite antenna system |
| 26/05/13 | Repair of Alinco DR130 |
| 26/05/07 | Making a Repeater Controller Pert3 |
| 26/05/03 | Indonesian satellite friend YC8RPK |
| 26/04/26 | DXCC200 achieved |
| 26/04/23 | Communication via ISS voice repeater |
| 26/04/20 | WSJT-X Auto Run Ver0.1.5 |
| 26/04/19 | Got an Alinco DR-130 |
| 26/04/15 | Clublog Charts |
| 26/04/10 | Regarding POC transceivers |
| 26/04/08 | Using KENWOOD AT-300 with YAESU radio |
| 26/03/17 | How to establish a radio club in the Philippines |
| 26/03/10 | KENWOOD AT-300 with YAESU radio |
| 26/02/27 | Philippine NTC Amateur Radio License Examination Question Bank |
| 26/02/20 | Package received from JK1SNS |
| 26/02/18 | Temporary License Renewal |
| 26/02/14 | Satellite Tracking Software SatTrack |
| 26/02/05 | Making a Repeater Controller Pert2 |
| 26/02/02 | CQ on satellite IO-86 |
| 26/01/27 | Shack & Repeater Controller |
| 26/01/16 | Making a Repeater Controller |
| 26/01/16 | Making aRotator Interface PCB |
| 26/01/10 | Satellite antenna installation |
| 26/01/08 | WSJT-X Remote Operation |
| 26/01/07 | JTDX Remote Operation |
| 26/01/04 | log_reciver_Ver2.6.6 |
| 26/01/04 | Tailscale VPN software for JTDX_Remote |
| Online Multiple Choice Reviewers to the Phil Amateur Radio Examination by 4F3EW A joint project by JI1FGX/DU9 and DV9JRD |
| Creating data for 3D printers using FreeCAD (2026/06/30) | ||
|---|---|---|
| I used a software called FreeCAD to create data for a 3D printer. However, I'm still not at the point where I can use the software effectively. This process involves instructing CathGPT to create macros based on the output image.  |
||
| These days, many DIY electronics projects use LCD panels. I bought a hand nibbler from Amazon to cut the rectangular opening in an ABSenclosure, but it's still very difficult to make the opening look neat and professional.  |
||
| So I searched for a company that does 3D printing on Shopee, a Philippine online shopping site, and I found one! Pin3D https://shopee.ph/3D-Printing-Services-Affordable-and-High-Quality-i.115897435.25457094767  |
||
| The front panel was made by ChatGPT. ChatGPT is also available in FreeCAD.FCStd file.Since I couldn't make it myself, they kindly taught me every step of the way. But it seemed difficult, so I asked if there was any way to do it, and they created it using Python.FCMacro file.So, it was possible to make it. If you open this file in FreeCAD, you will get a drawing like the one below. The panel is white, and the lettering is finished in black.  |
||
FreeCAD is a 3D CAD program, so you can rotate it like this. |
||
We can also modify the case to fit the mounting slots of the case you purchased. |
||
1.3-inch OLED display. |
||
| I found the mounting bracket for this display unit on the internet. https://www.printables.com/model/1338552-13-oled-display-easy-mounting-frame/files.  |
||
 |
||
| 3D printers are available for purchase online at Shopee.10,000 pesos (26,500 yen)from.40,000 pesos (106,000 yen)I will. So I looked up some companies and requested quotes, and they offered two options. 180 pesos (480 yen)They said they would make it for me. Since you only need a small amount for a single print job, it's more reasonable than buying a 3D printer.  |
||
| June 16, 2026. July 5, 2026 |