JI1FGX/DU9 Amateur Radio Diary, Mindanao, Philippines, IOTA OC-130
English Japanese



Yesterdays access
Page Top [Lily Diary.】
A diary of life in Mindanao.
26/11/11  SatBox Mini A Rotator Interface
26/11/08  3D-Printing Files for an IC-705 Cooling Fan UnitUpdated
26/11/07  SatBox_Ver0.1.1c-beta IC-9700 Test VersionUpdated
26/11/07  SatBox User GuideUpdated
26/11/03 An FT-847 for SatBox DevelopmentUpdated
26/11/02 Buying a ZT219 Digital MultimeterUpdated
26/10/28  Building a home server using Linux
26/10/27  Repeater Controller Features and Settings
26/10/27  Repeater Controller Board and Firmware
26/10/26  JTDX Auto Run Ver0.7.7
26/10/26  WSJT-X Auto Run Ver0.1.6
26/10/22  Memories of UNIX and Networking from My Yonezawa Ham Shack
26/10/20  Acquiring a YAESU FT-2600M for a Repeater
26/10/19  Rotator Relay Interface for Sale
26/10/18  Kenpro Rotator Interface KiCAD DATA
26/10/17  JOTA in Indonesia: Jamboree on the Air
26/10/17  You Can Now Leave Comments
26/10/11  Installing Arduino IDE
26/10/09  DXCC200 Sticker Arrives from ARRL
26/10/08  SatBox Cloud Released
26/10/06  Bought an ECS LIVA Z Mini PC on Yahoo Auctions
26/10/05   QSO with C5R in The Gambia
26/10/04  Installing Raspberry Pi OS
26/10/02  Repeater Controller Features and Settings
26/10/01  Repeater Controller Board and Firmware
26/09/30  Ordering PCBs and Assembly from JLCPCB
26/09/24  UNITRUST Electronics Parts Shop
26/09/22  Kenpro Rotator Interface
26/09/18  SatBox KiCad PCB and firmware
26/09/14  designed a circuit board for SatBox
26/09/12  Solar Power System Plan
26/09/09  Satellite SatBox Part 4
26/09/04  My grandson Zion
26/08/29  Ham Fair 2026 to be held
26/08/25  QSO with RI1FJL from Franz Josef Land
26/08/23  Satellite QSO via RS-44
26/08/22  Currently, Satellite VUCC46
26/08/16  Satellite SatBox Development in Progress - Part 3
26/08/05  IC-820H Receiver Sensitivity Test
26/08/02  Satellite SatBox Development in Progress - Part 2
26/07/16  Delivery of the 3D printed panels
26/07/09  Development of SatBox for satellites
26/07/05  Weather Monitor Indoor Unit
26/06/30  Creating data for 3D printers using FreeCAD
26/06/16  Installing an AS5600 magnetic encoder on a KR-500.
26/06/05  Grandson Zion's CQ
26/06/04  Replacing the potentiometer on the KR-500 elevation rotator
26/06/03 Making a Repeater Controller Pert4
26/06/01   Weather Monitor software
26/05/31   Weather Monitor
26/05/21   JTDX Auto Run BUGFIX
26/05/17  Repair of satellite antenna system
26/05/13  Repair of Alinco DR130
26/05/07  Making a Repeater Controller Pert3
26/05/03  Indonesian satellite friend YC8RPK
26/04/26  DXCC200 achieved
26/04/23  Communication via ISS voice repeater
26/04/20  WSJT-X Auto Run Ver0.1.5
26/04/19  Got an Alinco DR-130
26/04/15  Clublog Charts
26/04/10  Regarding POC transceivers
26/04/08  Using KENWOOD AT-300 with YAESU radio
26/03/17  How to establish a radio club in the Philippines
26/03/10  KENWOOD AT-300 with YAESU radio
26/02/27  Philippine NTC Amateur Radio License Examination Question Bank
26/02/20  Package received from JK1SNS
26/02/18  Temporary License Renewal
26/02/14  Satellite Tracking Software SatTrack
26/02/05  Making a Repeater Controller Pert2
26/02/02  CQ on satellite IO-86
26/01/27  Shack & Repeater Controller
26/01/16  Making a Repeater Controller
26/01/16  Making aRotator Interface PCB
26/01/10  Satellite antenna installation
26/01/08 WSJT-X Remote Operation
26/01/07 JTDX Remote Operation
26/01/04  log_reciver_Ver2.6.6
26/01/04  Tailscale VPN software for JTDX_Remote

Online Multiple Choice Reviewers to
the Phil Amateur Radio Examination
by 4F3EW


A joint project by JI1FGX/DU9 and DV9JRD
Kenpro Rotator Interface — Design File Downloads (October 18, 2026) 

KiCad Design Files for DIY Construction and Evaluation

This relay interface allows a controller such as SatBox or the Fox Delta ST2 to control a Kenpro AC motor rotator. This page provides the schematic, PCB data, and KiCad library for download.

Download the design files / How to use the files

To purchase a bare PCB or an assembled board, please visit the Rotator Relay Interface sales page for prices, available options, and contact details.

Important Notice for Ver1.1 Users

There was a serious error in the Ver1.1 PCB layout. I apologize for the inconvenience. Please use the Ver1.2 design files below for new builds and PCB orders.

If you have already made a board using Ver1.1, compare it with the Ver1.2 schematic and PCB data and check the wiring before applying power. If anything is unclear, contact me by email with the version used and details of your board.

The motors in the Kenpro rotators covered here operate on 24 V AC.
A relay interface is therefore required to control them using the Fox Delta ST2 or SatBox.





Download the Design Files

Download both the Ver1.2 schematic and PCB data and the KiCad library ver6.
Older file names are listed for reference. The linked files are the versions provided on this page.
 KiCad schematic and PCB data  Previous version:
  4_Rotator Interface_KiCAD_Ver1.0.zip
 Previous version (layout error):
  4_Rotator Interface_KiCAD_Ver1.1.zip

 4_Rotator Interface_KiCAD_Ver1.2.zip

There was a serious error in the PCB layout of Ver. 1.1.
I'm very sorry.

Downloads: 40
 KiCad library  Previous version: KiCad_Library_ver3.zip
 KiCad_Library_ver6.zip
Downloads: 39

How to Use the Downloaded Files

  1. Save and extract both ZIP files: the Ver1.2 schematic and PCB data and the KiCad library ver6. Use separate working folders to avoid mixing them with older versions.
  2. Open the extracted design files in KiCad and inspect both the schematic and PCB. Confirm that you are using Ver1.2.
  3. If symbols or footprints cannot be found, check the location of the extracted libraries and your KiCad library settings. Specify file names and paths according to the extracted folder structure.
  4. Before ordering boards, run the electrical rules check (ERC) on the schematic and the design rules check (DRC) on the PCB, and review the reported issues. Also check board dimensions, hole locations, connector orientation, and actual component dimensions.

Before Assembly and Connection

Operation has been tested with the Kenpro KR-400 and KR-500. For other models, check the motor drive voltage, terminal assignments, control method, and relay contact ratings.

The required power supply circuitry differs depending on whether you use the original potentiometer or replace it with an AS5600 magnetic encoder. Refer to the board description below and the related construction article to confirm the configuration you need.

Disconnect power before wiring. Check for short circuits, correct component polarity, and correct connector wiring before applying power. When testing with the rotator, verify the direction of rotation and stopping operation before use.

Download Problems and Inquiries

If saving does not begin after clicking a link, check your browser's download history and any error messages. If the problem continues, email JI1FGX/DU9 with the file name and the error shown.

For construction questions, include the design file version, KiCad version, and the model numbers of your rotator and controller. Comments below this article are published after approval; please do not include personal information such as your address or telephone number.

 This relay interface connects SatBox to a Kenpro rotator.
The interface uses four SRA-05VDC-CL relays.
This is an interface board designed with KiCad.
It has already been ordered from JLCPCB.
Note: The DC-DC LM2590 circuit on the right side is normally not required.
It is used only when replacing the potentiometers inside the rotator with AS5600 magnetic encoder angle sensors.
https://ji1fgx.com/en/260604.html
 
Survey
Rotator Interface
Please select one response in each row to indicate your interest in each option.
This survey is not an order or a commitment to purchase.
Bare PCB
0 votes
0 votes
0 votes
0 votes
Fully assembled PCB
0 votes
0 votes
0 votes
0 votes

 October 17, 2026 October 19, 2026